Professional outdoor surface maintenance

Kersten sweepers for clean, safe and longer-lasting surfaces

Remove soil, moss, leaves, sand and heavy debris before they block drainage, create slip hazards or provide the growing medium that allows weeds to establish.

  • Pedestrian to agricultural tractor ranges
  • Front and rear mounting options
  • Five-row spiral brush technology
  • Collector, gully brush and dust-control options
Check my machine fitment Browse all sweeper ranges
Kersten professional sweeper mounted to a compact tractor
Built to move heavier material while maintaining accurate brush contact across hard and artificial surfaces.
10 sweeper rangesFrom narrow pedestrian work to large agricultural carriers.
Five-row spiral brushesDesigned to create space for soil, moss and bulky debris to move.
Accurate height controlGauge wheels help maintain contact and manage brush wear.
Application supportMounting, drive, hydraulic flow and accessory requirements checked.
Start with your carrier

Which machine will power the sweeper?

Select the closest carrier type to reach the most relevant ranges. Final suitability depends on mounting, lift capacity, PTO or hydraulic drive and the working width required.

Pedestrian

Two-wheel tractors

Kersten K-Series, UBS-Series and Matador M-Trac applications.

 Light carriers

Ride-on mowers and sub-compacts

Compact, lightweight front-mounted sweeper ranges.

 Compact tractors

12–40 hp carriers

Front or rear mounting with mechanical or hydraulic drive choices.

 Heavy duty

30–130 hp carriers

More robust sweeper frames for higher-volume site work.

 Large carriers

80–250 hp tractors and loaders

Large-diameter brushes for roads, yards and industrial sites.
Machine compatibility

Find the mapped sweeper configuration for your carrier

Select the make, model and mounting position to see the bracket, sweeper, collector and gully-brush configuration held in the Kersten fitment database.

Sweeping mode
Mounting position
Complete range

Choose the sweeper that matches your machine and workload

Every individual range from the existing Kersten sweeper page is retained below, with a clearer indication of the carrier, mounting position and duty level it is designed for.

Pedestrian sweepers

For confined access, paths, courtyards, artificial surfaces and areas where a tractor is too large.

Two-wheel tractor attachments
Pedestrian EFKM sweeper attachment
Pedestrian

Pedestrian EFKM Sweepers

Hydraulic and mechanical sweeper attachments for Kersten K-Series, UBS-Series and Matador M-Trac power units, including de-moss brush options.

  • Two-wheel tractors
  • Hydraulic or mechanical
  • Optional collection
Explore EFKM sweepers

Ride-on mower and sub-compact ranges

Lightweight front-mounted solutions for smaller carriers, narrow routes and regular site presentation.

37 cm brush diameter
Kersten FKM 37 front-mounted sweeper
Front mounted

Kersten FKM 37 Sweepers

A compact, low-weight range for ride-on mowers, up-front mowers and sub-compact tractors, with PTO or hydraulic models and multiple mounting options.

  • 37 cm brush
  • 30° angling
  • Gauge-wheel height control
Explore FKM 37 sweepers
Kersten FKDR 37 sweeper for a ride-on mower
Ride-on mower

Kersten FKDR 37 Sweepers

Hydraulically driven sweepers for ride-on mowers using the Kersten FKDR front linkage and hydraulic power system.

  • 100–125 cm widths
  • 37 cm brush
  • Hydraulic drive
Explore FKDR 37 sweepers

Compact tractor sweepers

Choose front or rear mounting to suit the carrier, visibility required and the other attachments already in use.

Typically 12–40 hp
Kersten HKM 40 rear-mounted sweeper
Rear mounted

Kersten HKM 40 Sweepers

Compact rear-mounted, PTO-driven sweepers for smaller tractors where low weight and a short, manageable installation are priorities.

  • 12–40 hp
  • 40 cm brush
  • Mechanical PTO drive
Explore HKM 40 sweepers
Kersten FKM 40 front-mounted compact tractor sweeper
Front mounted

Kersten FKM 40 Sweepers

Hydraulic front-mounted sweepers for compact tractors, built around a strong folded-steel frame and a five-row spiral brush.

  • 125–150 cm widths
  • 20 L/min recommended
  • Loader frame options
Explore FKM 40 sweepers
Kersten KM 45 front-mounted sweeper
Front mounted

Kersten KM 45 Sweepers

Professional compact-tractor sweepers available with PTO or hydraulic drive for tractors, sub-compacts, up-front mowers and utility vehicles.

  • 15–40 hp
  • 130–165 cm models
  • 45 cm brush
Explore KM 45 sweepers

Heavy-duty mid-size sweepers

Robust construction and larger brush diameters for higher volumes of soil, mud and bulky debris.

Tractors, loaders and industrial carriers
Kersten KM 52 heavy-duty sweeper
Multi-carrier

Kersten KM 52 Sweepers

A heavy-duty hydraulic range for 30–80 hp tractors, with mounting possibilities for three-point linkage, loaders, telehandlers and forklifts.

  • 30–80 hp
  • 52 cm brush
  • Front or rear use
Explore KM 52 sweepers
Kersten KM 60 heavy-duty sweeper
Hydraulic drive

Kersten KM 60 Sweepers

A larger heavy-duty range for high-output work, with a 60 cm brush and mounting options for tractors, loaders, telehandlers and large forklifts.

  • 70–130 hp
  • 190–270 cm widths
  • 50 L/min recommended
Explore KM 60 sweepers
Kersten FKM 60 front-mounted agricultural tractor sweeper
Front mounted

Kersten FKM 60 Sweepers

Advanced front-mounted sweepers for agricultural tractors, with PTO drive, heavy-duty inboard transmission and preparation for KM Control.

  • 70–130 hp
  • 60 cm brush
  • Cat 2 or loader mounting
Explore FKM 60 sweepers

Large tractor and loader sweepers

High-capacity sweeping for roads, construction environments, large yards and industrial sites.

Largest Kersten range
Kersten KM 70 large tractor-mounted sweeper
Large carrier

Kersten KM 70 Sweepers

The largest Kersten sweeper range, using a 70 cm five-row brush for heavy debris and available for Cat 2 front linkage or loader mounting.

  • 80–250 hp
  • 70 cm brush
  • KM Control option
Explore KM 70 sweepers
Preventative maintenance

Why regular sweeping protects the whole site

Removing loose material is not simply cosmetic. It helps prevent the conditions that lead to weed growth, surface damage, drainage problems and avoidable safety risks.

1

Remove the growing medium

Soil, silt and decomposing organic matter collect in joints and edges. Removing it denies weeds, moss and algae the material they need to establish.

2

Reduce slips and obstructions

Wet leaves, moss, soil and loose debris can create hazardous surfaces for pedestrians, vehicles and machinery.

3

Protect drainage

Clear gutters, gullies and drain covers allow water to leave the surface instead of pooling and accelerating deterioration.

4

Improve presentation

Clean paths, car parks, yards and public spaces create an immediate impression of a well-managed site.

Kersten five-row spiral combination sweeper brush
Built around the brush

Designed to move heavy debris without wasting power

Five spiral rows leave spaces for larger volumes of soil, moss, sand and bulky material to travel through the brush. The spiral pattern concentrates contact across a narrower section at any one time, helping the carrier move heavier material efficiently.

  • Five-row spiral combination brush: creates voids for heavy material rather than pushing it ahead as a solid wall.
  • Fine height adjustment: gauge wheels maintain useful brush contact while limiting unnecessary wear.
  • Left and right angling: collect material, move it towards an edge or form a controlled windrow.
  • Carrier-specific mounting: front linkage, rear linkage, loader, telehandler and specialist ride-on systems are available across the range.
Configure the job

Accessories that turn sweeping into a complete clean-up operation

Accessory compatibility varies by model. Kersten can check the carrier, sweeper range and operating requirement before specifying the complete system.

Collector box fitted to a Kersten sweeper

Collector boxes

Collect swept material for removal instead of leaving a windrow. Available in manual and hydraulic configurations across suitable ranges.

View collector boxes
Kersten side gully brush

Gully brushes

Pull debris away from kerbs, walls and gullies into the path of the main roller brush for cleaner, more defined edges.

View gully brushes
Brush guard on a Kersten pedestrian sweeper

Brush guards

Keep dust and loose material close to the brush when windrowing, especially in confined or occupied areas.

View brush guards
Replacement five-row Kersten sweeper brush

Replacement brushes

Maintain consistent cleaning performance by replacing a worn or uneven roller brush with the correct model-specific component.

Find replacement brushes
Complete surface care

Some sites need more than one method. Combine preventative sweeping with collection or mechanical weed removal where material has already compacted or vegetation is established.

Kersten mechanical weed brush

Mechanical weed management

Remove established weeds and compacted growth before preventative sweeping takes over.

Explore weed management →
Practical guidance

Sweeper questions

How can dust be controlled when sweeping asphalt?

Use the slowest effective brush speed and introduce water at the brush or surface to bind fine particles. Suitable Kersten ranges can be equipped with water and dust-suppression systems.

What does a gully brush do?

It reaches into edges, kerb lines and gullies, then moves the material into the path of the main roller brush so it can be collected or windrowed.

When should the main sweeper brush be replaced?

Inspect it regularly and replace it when cleaning performance drops, the bristles are uneven or the available height adjustment can no longer maintain correct contact without excessive pressure.

Can the standard spiral brush and de-moss brush be used for the same work?

They are designed for different priorities. The spiral roller is the general choice for loose debris, soil, leaves and fine material. A de-moss brush is selected where stubborn moss and algae require more aggressive action.

What information is needed to specify a sweeper?

Kersten will need the carrier make and model, mounting position, available PTO or hydraulic services, lift capacity, access width, debris type, collection requirement and any need for gully brushes or dust suppression.

Match the sweeper to the carrier before you buy

Send the machine model, working environment and material you need to remove. Kersten will check mounting, drive, hydraulic flow, lift capacity, working width and suitable accessories.

Check compatibility Talk to Kersten

Frequently Asked Questions

Kersten sweepers are primarily designed as a first line of defence against weeds by removing detritus build-up on hard surfaces. They are specifically engineered to efficiently remove soil and heavy debris, which are major causes of weed growth. Their design features enable them to tackle much heavier material than typical sweepers, ensuring thorough cleaning and prevention of weed formation.

Kersten sweepers feature a roller brush with five spiral rows of bristles. The gaps between these rows provide ample space for the movement of larger volumes of heavy debris. Furthermore, the spiral pattern allows pressure to be applied across a narrow section of the brush rather than its full width, requiring less power and enabling the brush to effectively tackle substantial and heavy materials with greater efficiency than other brushes.

The height adjustment feature on Kersten sweepers allows for the fine-tuning of the brush pressure using the rear castors. This precise adjustment prevents unnecessary brush wear, thus extending the brush's lifespan. It also enables the brush to maximize performance across a diverse range of surfaces, as the two castors help the brush to closely follow contours, maintaining consistent contact with the ground for optimal cleaning.

Yes, Kersten sweeper brushes can be angled to sweep forward, left, or right. This angling capability offers significant versatility in material handling. It allows operators to either collect the swept material efficiently or wind-row it, which means gathering it into neat rows for later removal. This flexibility helps adapt to different cleaning tasks and site requirements.

Collector boxes are height-adjustable containers that can be attached to the sweeper to collect swept material such as soil, moss, and sand. They are sized for easy handling by one operator. Gully brushes are side brushes that can be fitted to pull material out from edges and gullies directly into the path of the main brush, ensuring it can be collected. Both accessories enhance cleaning efficiency, particularly for debris collection and maintaining clean edges.