Kersten FKDR 37 sweepers for ride-on mowers
Your mower.
More than mowing.
Add hydraulic sweeping to a compatible ride-on mower. Choose 100, 115 or 125 cm, then match the FKDR-HYDR linkage and power kit for controlled cleaning from the driver’s seat.
Choose the width that earns its place
Three sweepers. One hydraulic attachment system.
All three models use hydraulic drive and the Kersten FKDR coupling triangle. Choose a width that suits the mower, the surface and the narrowest access point — then check the complete installation.
100 cm · hydraulic drive
KM 10037 H-FKDR
Choose it when: a compact working width suits your mower and access routes. Check that it covers the tyres when angled for the job.
115 cm · hydraulic drive
KM 11537 H-FKDR
Choose it when: you need more coverage than the 100 cm model while keeping the installation compact for paths, gateways and mixed sites.
125 cm · hydraulic drive
KM 12537 H-FKDR
Choose it when: the mower width, access space and loaded lift capacity allow a wider pass across yards, drives and paved areas.
The sweeper price is only one part of the setup. The required mower-specific FKDR-HYDR kit, carrier and optional collector, guard or side brush are separate. Photographs show installations with optional equipment.
Work efficiently from the seat
Turn existing mowing capacity into cleaning capacity.
Keep the brush in view
Front mounting lets you watch the working edge as you approach kerbs and obstacles. The FKDR controls provide hydraulic lift and angling, so you can reposition the sweeper from the seat.
Control the cleaning action
Adjust brush speed through the hydraulic system and set contact with the two gauge wheels. The five spiral rows leave space for bulky debris; pendulum suspension helps the roller follow uneven ground.
Remove the material
A collector takes loosened soil and organic debris off the surface. That matters on paving: material left behind holds moisture and can become a growing layer for moss and weeds.
Required, separately supplied
The FKDR-HYDR kit mounts it and powers it.
Many ride-on mowers have no suitable hydraulic supply for a powered attachment. The FKDR-HYDR kit adds an engine-driven pump, reservoir, controls and front linkage to a compatible mower.
Compatible mower
Match the kit to the exact make, model and year. Confirm that a current installation is available.
Linkage + pump
The mower-specific frame provides mounting and lift; the engine-driven pump supplies implement oil.
Reservoir + controls
The hydraulic tank and valves support lift, angling and variable brush speed from the seat.
FKDR triangle + sweeper
The sweeper connects to the FKDR coupling triangle and hydraulic quick couplings.
A quick connection with its own power supply.
The coupling triangle makes attachment changes practical, while the hydraulic system powers the roller and positions the sweeper. Specify both parts together.
Check the attachment interface. These H-FKDR models are designed for the FKDR triangle. If you have a conventional front linkage and an ABR mounting arrangement, compare the FKM 37 range instead.
Explore the FKDR linkage system →| Mower route | Required kit | Kit price | Fitment check |
|---|---|---|---|
| Kubota GR1600 / GR1600-II | FKDR-HYDR-KUGR1600 → |
£2,495.00
Ex VAT · checked 1 Oct 2026
|
Confirm the exact mower version and installation. |
| Kubota GR2100 / GR2120 / GR2120 S | FKDR-HYDR-KUGR2120 → |
£2,495.00
Ex VAT · checked 1 Oct 2026
|
The GR2120 case study shows a 100 cm sweeper and collector. |
| John Deere X300 route | FKDR-HYDR-JDX300 → |
£2,495.00
Ex VAT · checked 1 Oct 2026
|
The product lists X350, X350R, X370 and X380. Check model and year. |
| John Deere X500 route | FKDR-HYDR-JDX500 → |
£2,495.00
Ex VAT · checked 1 Oct 2026
|
Confirm the exact X500-series model; the case study uses an X590. |
| Iseki SXG216 | FKDR-HYDR-ISSXG216 → |
£2,495.00
Ex VAT · checked 1 Oct 2026
|
Check the mower version and available installation kit. |
Send the exact mower details. A series name alone does not confirm fitment. Include model, year, serial number and photographs, plus the width and accessories you want. Check front axle and lift limits with a full collector.
Ask for a complete installation quotation → Compare front linkage and PTO systems →
Measure before you choose
Will it cover the tyres — and fit the gateway?
A wider straight pass is useful only if it fits the site and covers the carrier in the working position. Angling reduces the effective cleaning width; accessories increase the envelope and load.
| Model | Working width: straight | Working width: angled | Overall width: straight | Basic unit weight |
|---|---|---|---|---|
| KM 10037 H-FKDR | 100 cm | 89 cm | 108 cm | 51 kg |
| KM 11537 H-FKDR | 115 cm | 102 cm | 123 cm | 53 kg |
| KM 12537 H-FKDR | 125 cm | 110 cm | 133 cm | 55 kg |
Dimensions are for the sweeper without a side brush or mounting frame. The full mower, linkage, collector and other options determine clearance and loaded lift requirements. Confirm those dimensions for the proposed installation.
Build the cleaning setup
Collect, contain or bring debris in from the edge.
Start with the outcome you need. Collect debris for removal, windrow it with a guard, or add a side brush to bring material away from edges.
Choose the matching width
SSB K collector boxes
Choose collection when: soil, leaves and loosened debris need to leave the site. PE plastic construction, castor wheels and adjustable holders support ground following and brush wear adjustment. The current mounted catalogue lists manual-opening collectors.
| Product | Width | Price |
|---|---|---|
| SSB 100 K → | 100 cm |
£950.00Ex VAT · checked 1 Oct 2026
|
| SSB 115 K → | 115 cm |
£1,000.00Ex VAT · checked 1 Oct 2026
|
| SSB 125 K → | 125 cm |
£1,050.00Ex VAT · checked 1 Oct 2026
|
Family photograph; choose the listed variant matching your sweeper. Confirm the supplied configuration when ordering.
Choose the matching width
GUSPL front brush guards
Choose a guard when: material should be moved to one side rather than collected. It helps contain discharge near the roller when windrowing soil or suitable snow.
| Product | Width | Price |
|---|---|---|
| GUSPL 100 → | 100 cm |
£270.00Ex VAT · checked 1 Oct 2026
|
| GUSPL 115 → | 115 cm |
£300.00Ex VAT · checked 1 Oct 2026
|
| GUSPL 125 → | 125 cm |
£315.00Ex VAT · checked 1 Oct 2026
|
Family photograph; choose the listed variant matching your sweeper. Confirm the supplied configuration when ordering.
Ø 40 cm · hydraulic side brush
ASH 403237 hydraulic gully brush
Choose it when: edge debris needs pulling into the main roller and the installation supports the additional hydraulic drive. Adjustable position and hydraulic speed help control the work at the kerb.
Ø 40 cm · broom-shaft drive
ASM 403237 mechanical gully brush
Choose it when: a side brush driven mechanically from the main broom shaft suits the installation. Height and angle adjustment help reach edges. The main FKDR sweeper remains hydraulically driven.
Collector emptying and side-brush services. Specify the exact accessory arrangement with the mower and linkage kit. Confirm the collector opening method and any additional hydraulic connections before ordering.
Keep it ready for the next job
Look after the brush and its storage.
.jpg)
Five-row poly combi replacement rollers
Match both the width and 37 cm diameter. Inspect bristle condition and adjust working height as the brush wears; too much pressure wastes bristle life and can mark vulnerable surfaces.
| Replacement roller | Width | Price |
|---|---|---|
| 100 510 037 → | 100 cm |
£450.00Ex VAT · checked 1 Oct 2026
|
| 115 510 037 → | 115 cm |
£465.00Ex VAT · checked 1 Oct 2026
|
| 125 510 037 → | 125 cm |
£475.00Ex VAT · checked 1 Oct 2026
|
Optional storage equipment
AST 37 LR parking supports
Support the disconnected sweeper without resting its weight on the bristles. Castors also make it easier to move the attachment for storage and reconnection. Confirm the support kit supplied for your machine.
Match the equipment to the task
One mower platform, several maintenance routes.
For water-based hockey surfaces, sand-filled turf and rubber-crumb pitches, agree brush contact and collection settings with the surface supplier. Explore reciprocating brushes →
Real installations and useful guidance
See the system at work.
FKDR sweeper case study
A Kubota GR2120 beyond mowing
The 100 cm FKDR sweeper and SSB 100 K collector are shown alongside other attachments using the mower’s FKDR linkage.
Read the article →
FKDR platform case study
Weed brushing with a John Deere X590
See the linkage and power system used for a weed brush, and why a ride-on approach suits kerbs and path edges. This case study features weed brushing.
Read the article →Surface-maintenance guide
Sweeping as preventative weed control
How removing soil and organic debris disrupts the conditions weeds need — and why collecting the material matters.
Read the article →Choose the carrier as well as the brush
Would another setup suit the site better?
Before you specify
Your FKDR 37 questions answered.
Is the FKDR-HYDR kit included in the sweeper price?
No. The mower-specific linkage and hydraulic power kit is required and separately priced. Ask for a complete quotation including installation and the collector, guard or gully brush you need.
Can I use the mower’s existing lift hydraulics?
A lifting circuit is not automatically an implement power supply. The FKDR-HYDR kit provides a dedicated pump, reservoir and controls on compatible mowers. Confirm the complete system for your exact machine.
Does a kit listed for my mower series guarantee fitment?
No. Exact model, year, version and installation details matter, and kit availability can change. Send the mower’s serial number and photographs for a fitment check.
Which working width should I choose?
Match the brush to tyre width, access and working position. The 100, 115 and 125 cm models have published angled working widths of 89, 102 and 110 cm. Check the full carrier and accessories against gateways and lift limits.
Can I operate without a collector?
Yes, when windrowing material is appropriate. A correctly sized front guard helps contain discharge. Collect soil and organic debris when it needs to leave the surface rather than being moved elsewhere.
Is this the same mounting system as FKM 37?
No. The H-FKDR models use the Kersten FKDR coupling triangle and hydraulic power kit. FKM 37 models use an ABR 37 bracket matched to another front mounting arrangement. Have the carrier and interface checked before ordering.
Build the complete installation
Tell us which mower you use.
Send the model, year, surface and access width. We’ll help match the FKDR kit, sweeper width and cleaning options to your machine and site.