Attachments for Iseki SXG Series
High-tip mower.
Year-round sweeper.
The SXG already collects grass all summer. Add a front linkage and it can sweep, collect leaves and debris, clear snow and blow leaves through the winter, with Kersten’s commercial two-year warranty.
For the SXG323 and SXG326, and the current SXG324 and SXG327, high-tip and low-tip.
Sweeper and SXG 324 snow plough installations.
Mechanical sweeper, no extra hydraulics.
Plough and blower from the mower’s controls.
Commercial cover on Kersten attachments.
Sweep, plough and blow
Three ways to work your SXG through the winter.
The SXG takes two front-mounting systems. A Cat 0 front linkage with a front PTO kit drives a mechanical sweeper. Kersten’s FKDR hydraulic kit uses the mower’s own hydraulics and controls to lift and angle a snow plough or leaf blower.
.jpg)
Front PTO · proven on the SXG
KM 13045 M
130 cm working width · 45 cm brush · mechanical drive
Choose it for sweeping paths, car parks and leaves, with a collector and gully brush, as on the SXG in the photo.
Driven mechanically by a front PTO kit, so no extra hydraulics are needed. Build it in the configurator below.
£3,595.00 ex VAT
Listed product price · check configuration
Sweeper listing only. Front linkage, PTO kit, ABR bracket and options are specified around your mower.
FKDR hydraulic · proven on the SXG 324
SCHN 12545 FK-FKDR snow plough
125 cm working width · 45 cm blade height
Choose it to clear snow from paths and car parks, lifted and angled from the seat with the SXG’s own controls.
Spring trip protection, adjustable steel skids and a ROBALON scraper bar. Fits the FKDR-HYD-ISSXG324 front linkage kit.
£1,150.00 ex VAT
Listed product price · check configuration
Plough listing only. The FKDR hydraulic linkage kit is additional.
FKDR hydraulic · own engine
LBV-HO-FKDR leaf blower
11.7 hp Honda engine · up to 90 m³/min · ~8 m reach
Choose it to blow leaves into windrows ahead of the mower’s collector, on the same FKDR kit as the snow plough.
Its own engine powers the fan, so the mower only lifts and steers it. Noise-reduced turbine for parks and quieter sites.
£3,495.00 ex VAT
Listed product price · check configuration
Blower listing only. The FKDR hydraulic linkage kit is additional.
Prices are for the linked products, ex VAT, rather than complete fitted packages. Mounting, drive kits, fitting and optional accessories depend on the specification. The enquiry links carry the chosen product into the contact-page message.
SXG front-sweeper configurator
Build a complete KM45 sweeper for your SXG.
Add each component to see what it does and why it’s needed, then choose your options and send the build to us.
Bare Iseki SXG
Your mower
Iseki SXG
Reference:
Real mowers, real fitting decisions
See how Iseki SXGs and similar machines were equipped.
These installations show the systems on this page at work. Use them to start the discussion; we’ll match the details to your own mower.
Iseki SXG 324 Low Tip · snow plough
A plough that uses the mower’s own controls
A SCHN 12545 snow plough on a special FKDR hydraulic kit, lifted and angled from the seat with the SXG’s integrated hydraulics and control panel. The same kit takes the LBV leaf blower.
Read the case study →
Iseki SXG · front sweeper
Mower by summer, sweeper by winter
A KM45 front sweeper with collector box and gully brush on an Iseki SXG with its high-tip grass collector, ready for paths, car parks and leaves.
See the KM45 sweeper →
Iseki TXG · front sweeper
The same sweeper on the next size up
A KM 15045 H with brush guard on an Iseki TXG. If you need more power, the TXG compact tractor takes the larger sweeper range.
Read the case study →
Kersten sweeper and gully brush on an Iseki ride-on
Watch a Kersten front sweeper with gully brush working on an Iseki SF230, another Iseki ride-on mower turned year-round sweeper.
Watch on YouTube ↗More for the front linkage
Snow blowing and thermal weed control.
With the Cat 0 front linkage and PTO kit fitted, the SXG can carry more than a sweeper.
Winter · move snow away
Cerruti L 1000 snow blower
100 cm working width · mechanical PTO drive
Choose it when deeper snow or limited room means blowing snow away beats pushing it aside.
Sized for ride-on mowers and driven by the front PTO kit, like the sweeper.
See current price
Live price loads from the product page
We specify the mounting, drive and chute controls for your SXG.
Thermal weed management
HOAF mounted weed burners
Hot-air treatment · propane fuel
Choose a HOAF burner for chemical-free treatment of young weeds and moss on paths and gravel.
Gas supplies the treatment energy, so no PTO drive is needed. The photo shows a HOAF WeedAir on an Iseki.
We match the burner width and gas arrangement to the SXG.
Bigger jobs?
Need more power or a cab?
For heavier sweeping, weed brushing or gravel renovation, a compact tractor such as the Iseki TXGS or TLE takes the larger attachment range.
Two front-mounting systems
Choose by the attachment you need.
For a PTO-driven sweeper, the complete installation is:
The linkage lifts and lowers the sweeper, the PTO kit drives the brush mechanically and the ABR bracket connects it. Iseki supply the Cat 0 front linkage and PTO kit for the SXG, and we specify them with the attachment as one package.
For a snow plough or leaf blower, Kersten’s FKDR-HYD-ISSXG324 kit fits the SXG 324 and uses the mower’s integrated hydraulics and control panel to lift and angle the attachment, as in our case study.
SXG323, SXG324, SXG326 or SXG327?
The SXG range takes the same attachments. The FKDR hydraulic kit is listed for the SXG 324. Before we quote, we check your exact model, collector type (high-tip or low-tip) and serial number, confirm current prices and delivery times, and look for any quirks on your mower.
1. Cat 0 linkage + front PTO: sweepers and snow blowers
Mechanical drive gives the KM 13045 M and the Cerruti snow blower their power directly from the engine, with no hydraulic pump or oil supply to add.
2. FKDR hydraulic kit: ploughs and blowers
The FKDR kit uses the SXG’s built-in hydraulics, which are ideal for lifting and angling a plough. The LBV blower has its own engine, so it only needs lifting.
Keep the grass collector
Everything here mounts at the front, so the SXG’s high-tip or low-tip collector stays on for the grass-cutting season.
Allow for the weight
Allow for the attachment, bracket and a full collector box when specifying the setup. We confirm the front linkage’s capacity for your mower.
Build the mower-side installation
Linkage and brackets, explained.
These are the main mower-side components. We specify the matching linkage, drive and bracket around your SXG and attachment.
FKDR hydraulic kit, SXG 324
FKDR-HYD-ISSXG324: front linkage for FKDR snow ploughs and blowers, lifted and angled with the mower’s integrated controls.
£1,595.00 ex VAT
Listed component price
View fitting component →
ABR 45 KD bracket
Connects KM45 sweepers to the Cat 0 front-linkage A-frame on the SXG.
£795.00 ex VAT
Listed component price
View fitting component →
Iseki Cat 0 linkage & PTO kit
Supplied by Iseki for the SXG. It lifts and lowers the attachment and drives mechanical tools such as the KM 13045 M sweeper.
Price on request
Supplied with your attachment package
Ask for a price →
FKDR snow plough
SCHN 12545 FK-FKDR: 125 cm spring break-back blade for the FKDR linkage, as fitted to the SXG 324.
£1,150.00 ex VAT
Listed component price
View attachment →Questions before you choose
Can I fit a sweeper to an Iseki SXG 324?
Yes. The KM 13045 M sweeper mounts on a Cat 0 front linkage and is driven by a front PTO kit, with a collector, gully brush, dust suppression or brush guard as options. Use the configurator to build it and send it to us.
Mechanical PTO or hydraulic drive?
For the sweeper and snow blower, a front PTO kit drives them mechanically. The SXG’s own hydraulics are ideal for lifting and angling, which is why the FKDR snow plough and blower use them. The blower has its own engine for the fan.
Can I keep the grass collector on?
Yes. All of these attachments mount at the front, so the high-tip or low-tip collector stays on.
Will these attachments fit my SXG?
Yes, the range is matched to the SXG. Before we quote, we check your exact model, collector type and serial number, confirm current prices and delivery times, and look for any quirks on your mower, so what arrives fits first time.
What warranty do the attachments carry?
Kersten attachments for the Iseki SXG series come with a commercial two-year warranty.
What should I send for a quotation?
Send the exact model and serial number, whether it’s high-tip or low-tip, photos of the front of the mower, whether a front linkage or PTO kit is already fitted, and the job and access width.
Start with the mower you already own
Let’s match the complete SXG setup.
Tell us your SXG and the work you want it to do. We’ll specify the attachment, linkage, drive, bracket and controls together.
- Exact model and serial number
- High-tip or low-tip collector
- Front linkage or PTO kit already fitted
- Task, surface, access width and options you need