Attachments for Iseki TLE Series
40 hp compact tractor.
Year-round tool carrier.
The TLE3410 has the power, hydraulics and rear linkage for serious site work. Add a front linkage and it can sweep, clear leaves and snow, remove weeds and renovate gravel, with Kersten’s commercial two-year warranty.
For the TLE3410 and earlier TLE3400. Attachments fit the front linkage, the rear linkage or both, driven by the PTO or hydraulics.
Sweeper and weed brush case studies.
Drives a KM45 hydraulic sweeper.
540 rpm rear PTO, front PTO kit available.
Commercial cover on Kersten attachments.
Start with cleaner surfaces
Three ways to clean surfaces with your TLE.
Remove leaves, soil, moss and organic debris before they build up, block drainage and give weeds somewhere to grow. Choose the working position and drive system together, not just the width.
Rear hydraulic · proven on the TLE3410
KM 15052 H
150 cm working width · 52 cm brush · 30 l/min
Choose it for rear sweeping with collection, keeping the front of the tractor free. This is the sweeper in our TLE3410 case study.
Mounted on the rear three-point linkage with the ABR 52 HECK bracket. The SSB 15052 collector empties hydraulically from the same double-acting spool.
£2,495.00 ex VAT
Listed product price · check configuration
Sweeper listing only. Rear bracket, collector and dust suppression are specified around your tractor; ask about the current sweeper package deal.
Front hydraulic · tractor oil supply
KM 15045 H
150 cm working width · 45 cm brush · 20 l/min
Choose it for front sweeping with collection, kerb-edge cleaning or dust control, driven from the TLE’s own hydraulics.
The configurator below pairs it with the TLE Cat 0 front linkage and ABR 45 KD bracket.
£3,950.00 ex VAT
Listed product price · check configuration
Supplied with the ABR 45 bracket. Front linkage, auxiliary valve and options are specified around your tractor.
Front weed brush · proven on the TLE
UB 6080 H
60 cm brush plate · hydraulic drive · 25 l/min
Choose it when established weeds and moss need removing from kerbs, joints and hard surfaces before sweeping.
Our TLE case study runs it from the tractor’s hydraulics, on the TLE front linkage with the ABR UB KD bracket and a BT 060 FL brush plate.
£7,295.00 ex VAT
Listed product price · check configuration
Front linkage, front hydraulic system and brush plate are specified around your tractor. Follow up with a sweeper to collect the loosened debris.
Prices are for the linked products, ex VAT, rather than complete fitted tractor packages. Mounting, drive kits, fitting and optional accessories depend on the specification. The enquiry links carry the chosen product into the contact-page message.
TLE3410 front-sweeper configurator
Build a complete KM45 sweeper for your TLE3410.
Add each component to see what it does and why it’s needed, then choose your options and send the build to us.
Bare Iseki TLE3410
Your tractor
Iseki TLE3410
Reference:
Real tractors, real fitting decisions
See how TLE tractors were equipped.
These examples explain the choices behind each installation. Use them to start the discussion, then confirm the details for your own tractor.
TLE3410 · rear hydraulic sweeper
Rear sweeping with collection
A KM 15052 H on the rear linkage, driven from the tractor’s hydraulics, with a hydraulically emptied SSB 15052 collector and optional dust suppression.
Read the case study →
TLE · front hydraulic weed brush
Remove weeds without chemicals
A UB 6080 H on the TLE front linkage and front hydraulic system, with the ABR UB KD bracket and a 60 cm brush plate.
Read the case study →
Iseki TXG · front hydraulic sweeper
The front sweeper alternative
A KM 15045 H with brush guard on a Cat 0 front linkage, driven from the tractor’s own hydraulics: the front-mounted option for the TLE too.
Read the case study →
Kersten sweeper and gully brush on an Iseki
Watch a front-mounted Kersten sweeper with gully brush working on an Iseki SF230 outfront mower.
Watch on YouTube ↗
UB 6080 H weed brush in action
Watch the hydraulic UB 6080 H, the weed brush used in our TLE case study, clearing weeds and moss from hard surfaces.
Watch on YouTube ↗Beyond the sweeping round
Keep the TLE working all year.
Match the action to the problem: blow loose leaves, treat weeds with heat, renovate gravel, clear snow or cut rougher grass. Each needs its own mounting and power specification.
.jpg)
Leaves & loose organic debris
LBV 6900 M
Mechanical PTO drive · 85 kg blower
Choose it for moving leaves to a planned collection area before they become wet, compacted detritus.
Uses the carrier’s PTO rather than a separate blower engine. Right-hand fixed discharge is standard; the photo shows the hydraulic rotary outlet.
£5,395.00 ex VAT
Listed product price · check configuration
Mounting bracket and a compatible PTO arrangement are additional. Optional hydraulic chute rotation needs a suitable double-acting service.
Thermal weed management
HOAF WeedAir 1002 IB
100 cm working width · propane fuel · 77 kW
Choose it for chemical-free treatment of young weeds and moss on paths, gravel and sandy areas.
Three main burners and two independent side burners. Gas supplies the treatment energy, so no PTO drive is needed.
£11,950.00 ex VAT
Listed product price · check configuration
75 kg before gas. Specify the bracket, gas carrying arrangement and controls, and check the loaded weight against the linkage’s lift capacity.
%20660.jpg)
Rear PTO · gravel renovation
WE 110 M-DP
110 cm working width · CAT 1 / 1N rear linkage
Choose it for restoring unsealed gravel paths rather than sweeping loose stone off the surface.
Counter-rotating tools loosen and level the upper surface. Choose knives, chisels or brush tools around the gravel construction.
£7,295.00 ex VAT
Listed product price · check configuration
Photo shows another carrier. Confirm the TLE’s Category 1 hitch, tool set and PTO speed.
Winter · push snow aside
SCHN 13545 FK-ABR
135 cm blade width · 45 cm blade height
Choose it for access routes and car parks where cleared snow can be placed beside the route.
Spring-protected blade, adjustable skids and a replaceable edge. No rotating PTO drive is needed.
£1,650.00 ex VAT
Listed product price · check configuration
Blade listing without ABR bracket. Specify the bracket for your front linkage and the lifting / angling services.
Winter · move snow away
Cerruti L 1200 B
120 cm working width · two-stage design
Choose it when deeper snow or limited room for windrows makes blowing more useful than pushing.
The listing specifies 20–40 hp carriers, with hydraulic chute rotation and deflector adjustment.
£6,350.00 ex VAT
Listed product price · check configuration
Photo shows another carrier. TLE suitability needs the TLE front PTO kit, a matched gearbox, mounting, lift and hydraulic-control check.
Grass, banks & rough cutting
Rotary & flail mowers
Rear mounted · 540 rpm PTO
Choose a mounted mower for rougher grass, banks and verges.
Rotary mowers suit regular cutting; flail mowers handle longer, rougher growth and leave a finer finish.
Choose by width and weight to suit the TLE’s Category 1 hitch and 40 hp engine.
Choose the system before the individual parts
A linkage lifts.
A PTO or hydraulic supply powers.
For most front attachments, the complete installation is:
The linkage provides the lift and coupling. The ABR bracket connects the attachment to that coupling. The drive system provides the working power. Buying one does not automatically provide the others.
Cat 0 or Cat 1 A-frame. The TLE front linkage can be supplied with a Cat 0 or Cat 1 A-frame. Kersten’s FL ISEKI TLE3400 kit comes with a Cat 0 A-frame, which takes the ABR 45 KD bracket used by KM45 sweepers.
TLE3410 or TLE3400: why the exact model matters
The Kersten front linkage, front PTO and auxiliary valve kits are listed for the TLE3400. The TLE3410 is the current model, so fitment of the same kits must be confirmed. The larger TLE4550 needs its own specification. Send your model, serial number and photographs so the complete installation can be checked.
1. Rear PTO: avoid a front conversion
The TLE3410 has a 540 rpm rear PTO with independent clutch and a Category 1 hitch lifting 1,000 kg at the link ends. Rear sweepers, gravel renovators and mowers work from the back of the tractor.
2. Front hydraulics: use the tractor’s own oil
The TLE3410’s pump gives 28.3 l/min, and one auxiliary valve is standard. That can drive the KM 15045 H, which needs 20 l/min. The TLE3400 auxiliary valve kit adds services where more are needed.
3. Front mechanical PTO: maximum power
The TLE has no mid PTO, so mechanically driven front attachments use the dedicated TLE front PTO kit. Match the attachment’s gearbox, speed and rotation, or use a PTO-driven hydraulic system as in our weed-brush case study.
Check the lift capacity
Allow for the attachment, bracket, a full collector, water tanks or gas bottles when specifying the complete setup, and confirm the front linkage’s lift capacity for your tractor.
Build the tractor-side installation
Linkage, bracket and power options, explained.
These are the main tractor-side components. Ask us to specify the matching linkage, drive and bracket around your exact TLE and attachment.
TLE front linkage
FL ISEKI TLE3400-CAT0 A: front linkage kit supplied with a Cat 0 A-frame. Front PTO and auxiliary valve kits are optional.
£1,895.00 ex VAT
Listed component price
View fitting component →
ABR 45 KD bracket
Connects KM45 sweepers to Cat 0 front-linkage A-frames, such as the TLE front linkage kit.
£795.00 ex VAT
Listed component price
View fitting component →
Auxiliary valve kit
TLE3400-AUX-KIT: adds auxiliary hydraulic services for front hydraulic attachments, sweeper angling or collector emptying.
£795.00 ex VAT
Listed component price
View fitting component →
TLE front PTO kit
FPTO ISEKI TLE3400: brings PTO drive to the front for mechanically driven attachments, as the TLE has no mid PTO.
£1,295.00 ex VAT
Listed component price
View fitting component →The linkage, front PTO and auxiliary valve kits are listed for the TLE3400; we confirm fitment for the TLE3410 before supply.
What happens to the material matters.
Questions before you choose
What can a TLE do with Kersten attachments?
With a front linkage and the right drive, a TLE becomes a tool carrier with lift, lower and angling functions. It can sweep, remove weeds and moss, blow leaves, treat weeds thermally, renovate gravel, clear snow and cut rough grass.
Can the TLE run a hydraulic sweeper from its own hydraulics?
The TLE3410’s pump gives 28.3 l/min and the KM 15045 H needs 20 l/min, so it can usually run from a tractor auxiliary service. We confirm the continuous flow, return and controls for your tractor, and the auxiliary valve kit adds services if needed.
Cat 0 or Cat 1 A-frame?
The TLE front linkage can take either. Kersten’s TLE kit is supplied with a Cat 0 A-frame, which matches the ABR 45 KD bracket for KM45 sweepers. Other attachments may suit a Cat 1 A-frame; we specify the bracket to match.
Will kits for the TLE3400 fit my TLE3410?
The front linkage, front PTO and auxiliary valve kits are listed for the TLE3400. The TLE3410 is the current model, so send your model, serial number and photos and we’ll confirm the right kit.
What warranty do the attachments carry?
Kersten attachments for the Iseki TLE series come with a commercial two-year warranty.
What should I send for a quotation?
Send the exact model, year or serial number, photos of the front and rear of the tractor, whether a front linkage is fitted, which hydraulic services you have, and the job and access width. Include any collection, angling or dust-control options you need.
Start with the tractor you already own
Let’s match the complete TLE setup.
Tell us your tractor and the work you want it to do. We’ll help specify the attachment, linkage, drive, bracket and controls together.
- Exact model and year / serial number
- Front linkage and hydraulic services fitted
- Rear PTO, hitch and loader fitted
- Task, surface, access width and options you need