Product Overview
The flail mower RYDER can be applied to the front of a significant variety of Outfront Mowers (from 15 to 40 Hp),using the mower lift arms to raise and lower the flail. It can be equipped with sticks or blades depending on the requirement of use. Thanks to the high number of revolutions of the rotor, it is possible to neatly cut the grass and perform an excellent mulching action at the same time. RYDER is designed for use on lawns, in gardens and in urban areas.
In the version with blades, it is possible to insert a vertical blade (on request) to be able to aerate the soil.
- Dimensions (L/W/H) 1800 x 800 x 640 mm
- Cutting width 1400 mm
- Weight w/o accessories 290 kg
- Drive type mech. / hydr.
- Tractor attachment Lift Arms
- Drive rpm 1000 / 2000 rpm
- Direction of rotation right / left ✔
- Number of knives 44
- Recommended for tractors with a total power of 15 - 30HP
Applications
Long Grass & Dense Vegetation
Some areas of your site are probably covered by fast growing vegetation such as nettes, brambles, thistles and other weeds. These weeds cannot usually be tackled by an ordinary mower. Depending upon the size of the area you are trying to tackle, these can be dealt with using strimmers, or on larger areas a Flail mower. When using a Flail it is important to determine the Finish that you require. Boot type blades will typically deal with heavier material such as saplings and woody plants. However the finish will usually be better on grass with Y type Flails.
