Attachments for John Deere 1400 & 1500 Series Outfront Mowers | Kersten UK
John Deere 1550 outfront mower with a Kersten KM 15045 sweeper

John Deere 1400 & 1500 Series outfront mowers

Your outfront mower.
Working all year round.

The 1400/1500 Series already has lift arms and a PTO, so it’s a cost-effective machine to carry PTO-driven attachments. Take the cutter deck off and fit a sweeper, weed brush, leaf blower or snow blower instead. It needs just two arms and a PTO shaft, with no hydraulics.

Fits the John Deere 1445, 1505, 1515, 1550, 1565, 1570, 1575, 1580 and 1585. Kersten attachments carry a commercial two-year warranty.

PTO-driven

No hydraulics needed for the core range.

Two arms and a shaft

Fits where the cutter deck comes off.

1445 to 1585

One ABR bracket system for the range.

2-year warranty

Commercial cover on Kersten attachments.

Don’t let it sit idle all winter

Get more from the mower you already own.

Many 1400 and 1500 Series mowers spend half the year in the shed. With the right attachment, the same machine clears moss, mud and leaves from drives and lanes, brushes weeds from kerbs and keeps paths open in snow, using the integral lift and PTO it already has.

Deck off, attachment on

Remove the cutter unit and the attachment goes on in its place, on the mower’s own lift arms. Lift and lower it from the seat as you would the deck.

Powered by the PTO

The 1400/1500 Series doesn’t have hydraulics as standard, so every core attachment here runs mechanically from the PTO. The brush, blower or snow blower gets the engine’s power directly.

Add hydraulics for the extras

A sweeper collector that opens from the seat, or hydraulic angling on a snow blade, needs a John Deere hydraulic kit. Tell us what’s on your mower and we’ll quote what you need.

Attachments for the 1400/1500 Series

Sweep, brush, blow and clear snow.

Each attachment mounts on an ABR front-mower bracket made for the 1400/1500 Series lift arms. Start with the job you need most, and we’ll match the bracket and PTO shaft to your mower.

Kersten KM 15045 M PTO-driven front sweeper

Sweeping · most popular

KM 15045 M sweeper, 1.5 m

PTO drive · 45 cm 5-row spiral brush

Clears moss, mud, leaves, grit and light snow from drives, lanes, car parks and paths.

Add the GUSPL 15045 brush guard to control where debris goes. For heavy mud or grit, a narrower 1.3 m sweeper keeps the weight down.

£3,950.00 ex VAT

Listed product price

Kersten UB 6080 MK PTO-driven weed brush

Weeds & moss

UB 6080 MK weed brush

PTO drive · wide-angle cardan shaft

Removes weeds, moss and soil from kerbs, channels and path edges without chemicals.

The PTO-driven version suits the 1400/1500 Series as standard. If your mower has a hydraulic kit, ask about the hydraulic UB 6080 MH.

£6,595.00 ex VAT

Listed product price

Kersten LBV 6900 leaf blower with mechanical PTO drive

Leaves & grass clippings

LBV 6900 M leaf blower

PTO drive · front-mower bracket available

Blows leaves and clippings off paths, verges and car parks into rows for collection, far faster than a backpack blower.

Fits the 1400/1500 Series with the LBV front-mower mounting bracket.

£5,395.00 ex VAT

Listed product price

Cerruti L 1400 B front snow blower

Heavy snow

Cerruti L 1400 B snow blower

Mechanical drive · 1.4 m

Throws deep snow clear of drives, paths and access roads, so you can keep a site open when a blade would just push it into banks.

A Cerruti Basic is already proven on outfront mowers such as the Kubota F3890, Kubota’s equivalent front mower. See the video below.

£7,150.00 ex VAT

Listed product price

Kersten SCHN 140 cm snow blade

Snow & slush

SCHN 14060 snow blade, 140 cm

28° angling · ABR-SCHN mounting frame

A quick, low-cost way to push snow and slush off drives and car parks.

Hydraulic angling needs a John Deere hydraulic kit on the mower. Without one, ask us about manual angling.

£1,950.00 ex VAT

Listed product price

Something else in mind?

Weed burners, mowers and more

We also supply HOAF hot-air weed burners and tractor-mounted rotary and flail mowers. Tell us the job and we’ll tell you what suits your mower.

Prices are ex VAT and update live from each product page. Brackets and PTO shafts are listed below.

Brackets & parts

What goes between the mower and the attachment.

A typical sweeper set-up for the 1400/1500 Series is the ABR 45 FM bracket, the KM 15045 M sweeper and the GUSPL 15045 brush guard. We’ll confirm the exact parts for your model and serial number.

ABR 45 FM two-point bracket for front mowers

ABR 45 FM bracket

The two-point front-mower bracket for KM45 sweepers. It includes the mounting system and PTO shaft, and is made for your model, for example ABR 45 FM JD-1565.

£895.00 ex VAT

Listed product price

View bracket →
GUSPL 15045 front brush guard

GUSPL 15045 brush guard

A 1.5 m front guard that controls where debris goes when you sweep without a collector, so less is thrown at the mower and passers-by.

£340.00 ex VAT

Listed product price

View guard →
Kersten KM45 front sweeper on a compact tractor

Collector box

Pick up debris instead of pushing it aside. Emptying it from the seat needs a John Deere hydraulic kit on the mower.

Ask about a collector →
HOAF Weedair 150 hot-air weed burner on a compact tractor

HOAF weed burners

Hot-air weed control for gravel, paving and around obstacles, as part of a chemical-free weed programme.

View weed burners →

Real mowers, real results

See it on a John Deere outfront mower.

Two write-ups from our fitting work on John Deere 1400 and 1500 Series outfront mowers.

Kersten KM 15045 sweeper fitted to a John Deere 1550 outfront mower

John Deere 1550

A mostly idle mower now sweeps a long drive and lane

The customer needed to clear moss, snow and mud from a long drive and lane. We fitted a KM 15045 M sweeper, PTO-driven, with only two arms and the PTO shaft to connect. Regular sweeping now stops moss and debris building up, reducing slips, punctures and freeze-thaw damage.

Read the case study →
Kersten KM45 sweeper on a John Deere outfront mower

John Deere 1400 & 1500 Series

A sweeper for parks teams, large sites and councils

Why a 1.5 m KM45 sweeper with a 5-row spiral brush suits outfront mowers, when to choose the 1.3 m sweeper for heavy mud or grit, and what you need for a collector box.

Read the case study →
Video preview: KM 45 sweeper

The KM 45 sweeper

See the KM45 sweeper range at work, the same sweeper we fit to the 1400/1500 Series.

Watch on YouTube ↗
Video preview: Cerruti snow blower on a Kubota F3890

Cerruti snow blower on an outfront mower

A Cerruti Basic snow blower on a Kubota F3890, showing how a PTO snow blower works on a front-mower chassis.

Watch on YouTube ↗

How fitting works

Two arms and a PTO shaft.

The attachment uses the same integral lift and PTO as your cutter deck. There’s no front linkage or hydraulic valve to add for the core range.

Remove cutter deck→ ABR bracket on lift arms→ Connect PTO shaft→ Set height and angle
  1. Adjust the height wheels so the brush contacts the surface by about 50–60 mm.
  2. Move the pin in the adjusting arm to angle the sweeper, so debris goes to one side.
  3. Lower slowly, engage the PTO and drive slowly at mid-range engine speed. It sweeps better, makes the brush last longer and saves fuel.

We know what fits the 1400 and 1500 Series. Before we quote, we check your exact version and serial number, confirm current prices and delivery times, and look for any quirks on your mower, so what arrives fits first time.

No hydraulics needed

The 1400/1500 Series has no hydraulics as standard, so the sweeper, weed brush, leaf blower and snow blower all run from the PTO.

When you need a hydraulic kit

A sweeper collector that empties from the seat, or hydraulic angling on the snow blade, needs a John Deere hydraulic kit. If your mower already has one, tell us and we’ll widen the options.

Width and weight

The 1.5 m sweeper suits most sites. For heavy mud or grit, the 1.3 m version keeps the load on the front comfortable for the mower.

Which John Deere models do these fit?

John Deere 1445, 1505, 1515, 1550, 1565, 1570, 1575, 1580 and 1585 outfront mowers. Own an earlier model, such as the 1435? Send us the model and serial number and we’ll confirm.

Questions before you order

Do I need hydraulics on my 1400 or 1500 Series mower?

No. The sweeper, weed brush, leaf blower and snow blower here are all PTO-driven, so they run on a standard 1400/1500 Series mower. You only need a John Deere hydraulic kit for a sweeper collector that empties from the seat, or for hydraulic angling on a snow blade.

How long does it take to swap from the deck to an attachment?

The cutter unit comes off and the attachment goes on in its place. Only the two lift arms and the PTO shaft connect, so once you’ve done it once it’s a straightforward job.

Which sweeper width should I choose?

The 1.5 m KM 15045 M suits most drives, lanes and car parks. If you’ll mainly sweep heavy mud or grit, the 1.3 m sweeper keeps the weight on the front down.

Do I need a collector or a brush guard?

Without a collector, the sweeper pushes debris to one side, and the GUSPL 15045 brush guard controls where it goes. A collector picks debris up instead, but emptying it from the seat needs a hydraulic kit.

Will these fit another outfront mower?

Often, yes. ABR brackets are also made for other outfront mowers, including Kubota’s equivalent, the F-Series front mowers such as the F3890. Send us the make, model and serial number and we’ll confirm.

What warranty do the attachments carry?

Kersten attachments come with a commercial two-year warranty.

Talk to people who fit these every week

Tell us about your mower.

Send your model and serial number and the job you have in mind. We’ll confirm the attachment, bracket and PTO shaft, with current prices and delivery times.

  • Mower model and serial number
  • Whether a hydraulic kit is fitted
  • The job: sweeping, weeds, leaves or snow
  • Surfaces and site postcode
Call 0118 986 9253

Your details will be added to the contact-page message. Review it and add your contact information there before sending. Or open the contact form directly.

Frequently Asked Questions

Kersten provides a variety of front-mounted attachments designed for John Deere Out Front Mowers. These include Front Mounted Sweepers, Weed Brushes, Snow Ploughs, Leaf Blowers, and Weed Burners. These attachments are designed to expand the utility of your mower beyond just cutting grass, allowing for various landscaping and maintenance tasks and are engineered for reliable performance.

Kersten attachments connect to the front lift arms of John Deere Out Front Mowers, which are typically used to carry the mower deck. They are specifically designed to be run with the mechanical Power Take-Off (PTO) of the mower. This ensures efficient power delivery and seamless integration with the existing machinery for optimal performance across various tasks.

Kersten attachments for John Deere Out Front Mowers are backed by a commercial 2-year warranty. This warranty provides assurance of the product's quality and durability, ensuring that users can be confident in their investment. The robust design and comprehensive warranty signify that these attachments are built to work hard and deliver great results for many years.

Kersten attachments are designed to fit John Deere Out Front Mowers, such as the 1580 model or similar. These mowers come with specific lift arms that would normally carry the mower, and these arms are utilized to carry the Kersten PTO-driven attachments. The attachments are engineered to integrate seamlessly with the existing mower structure for efficient operation.

Kersten attachments provide significant benefits by expanding the versatility of John Deere Out Front Mowers. They are robust, PTO-driven, and backed by a commercial 2-year warranty, ensuring reliable performance and longevity. This translates into a product range that empowers users to tackle various tasks beyond mowing, confident in achieving great results for many years with their equipment.