Matev tractor-mounted spreaders
Precise material placement, configured around your tractor and route.
Choose fixed-width SPR-BX placement for sensitive boundaries or adjustable SPR-DS broadcast coverage from 1 to 8 metres, with capacities from 125 to 600 litres and steel or stainless-steel construction.
Choose the spreading principle first
Fixed placement or adjustable broadcast?
The most important decision is not hopper capacity. It is whether the material must remain inside a precise route width or be broadcast across changing surfaces.
SPR-BX fixed-width box spreaders
Material falls across the width of the implement rather than being thrown beyond it. This protects vehicles, façades, glazing, planting and other sensitive boundaries while reducing overspread.
View SPR-BX models →
SPR-DS adjustable disc spreaders
A variable 1–8 metre pattern covers narrow pavements and large open areas from the same machine. Four capacities and two construction levels make the range scalable from compact tractors to long municipal routes.
View SPR-DS models →What makes the range special
A configurable spreading system, not a one-format attachment.
Matev lets you choose the spreading principle, hopper size, material-contact construction, drive and dosing architecture around the real route and the tractor already in your fleet.
Placement
Exact boundaries or broad coverage.
SPR-BX keeps the pattern inside the implement width. SPR-DS can be narrowed to 1 metre or opened to 8 metres, allowing one carrier to move between pavements, estate roads and larger areas.
Control
Match the dosing system to the operation.
Mechanical control keeps the installation straightforward. Hydraulic and electronic options bring adjustment closer to the operator, while road-speed-related regulation helps hold a consistent application rate as the tractor changes speed.
Construction
Choose ST steel or IX stainless steel.
Every SPR-DS capacity is offered in robust ST steel and high-quality IX stainless-steel versions. Both use a low-wear PE hopper, stainless spreading plate and material-flow features designed for professional winter service.
Complete Matev programme
Eleven products, each with its own direct link.
Compare three SPR-BX fixed-width products and eight SPR-DS broadcast products. ST and IX versions are shown separately so you can open the exact model you are considering.
SPR-BX fixed-width box spreaders
SPR-BX 80 box spreader
The narrowest SPR-BX puts material only across its 800 mm implement width. It is designed for footpaths, entrances and constrained routes where grit must stay away from parked vehicles, facades, glass and planting.
SPR-BX 100 box spreader
The 1,000 mm product adds route capacity while retaining exact edge-to-edge placement. Its 190-litre hopper suits compact tractors working pavements, estate roads and municipal routes with sensitive boundaries.
SPR-BX 120 box spreader
The widest SPR-BX combines a 1,200 mm fixed treatment width with a 230-litre hopper. It is designed for longer routes where accurate placement remains more important than broadcast reach.
SPR-DS adjustable broadcast spreaders
SPR-DS 125 ST
The compact 125-litre product gives smaller tractors the same shaped PE hopper, protective grille and stainless spreading plate used across the professional SPR-DS range. The ST product uses a robust steel structure and is a strong-value choice for professional fleets that maintain the machine carefully after salt work. The adjustable 1–8 metre pattern supports both narrow-route and open-area treatment.
SPR-DS 125 IX
The compact 125-litre product gives smaller tractors the same shaped PE hopper, protective grille and stainless spreading plate used across the professional SPR-DS range. The IX product uses a high-quality stainless-steel structure for increased resistance to salt and corrosion during intensive winter service. The adjustable 1–8 metre pattern supports both narrow-route and open-area treatment.
SPR-DS 250 ST
The balanced 250-litre product combines useful route capacity with manageable dimensions and the full choice of mechanical, hydraulic, electronic or road-speed-related dosing. The ST product uses a robust steel structure and is a strong-value choice for professional fleets that maintain the machine carefully after salt work. The adjustable 1–8 metre pattern supports both narrow-route and open-area treatment.
SPR-DS 250 IX
The balanced 250-litre product combines useful route capacity with manageable dimensions and the full choice of mechanical, hydraulic, electronic or road-speed-related dosing. The IX product uses a high-quality stainless-steel structure for increased resistance to salt and corrosion during intensive winter service. The adjustable 1–8 metre pattern supports both narrow-route and open-area treatment.
SPR-DS 400 ST
The 400-litre product is designed for longer municipal and estate routes while retaining the ability to narrow the pattern for paths and constrained access roads. The ST product uses a robust steel structure and is a strong-value choice for professional fleets that maintain the machine carefully after salt work. The adjustable 1–8 metre pattern supports both narrow-route and open-area treatment.
SPR-DS 400 IX
The 400-litre product is designed for longer municipal and estate routes while retaining the ability to narrow the pattern for paths and constrained access roads. The IX product uses a high-quality stainless-steel structure for increased resistance to salt and corrosion during intensive winter service. The adjustable 1–8 metre pattern supports both narrow-route and open-area treatment.
SPR-DS 600 ST
The 600-litre product maximises route duration and reduces refill interruptions without giving up spread-width or dosing control. The ST product uses a robust steel structure and is a strong-value choice for professional fleets that maintain the machine carefully after salt work. The adjustable 1–8 metre pattern supports both narrow-route and open-area treatment.
SPR-DS 600 IX
The 600-litre product maximises route duration and reduces refill interruptions without giving up spread-width or dosing control. The IX product uses a high-quality stainless-steel structure for increased resistance to salt and corrosion during intensive winter service. The adjustable 1–8 metre pattern supports both narrow-route and open-area treatment.
Material flow and winter readiness
Designed to keep difficult winter material moving evenly.
Consistent spreading depends on everything before the disc or box outlet. Matev combines hopper geometry, screening, agitator options and moisture protection to stabilise the feed.
The low-wear, lightweight hopper is formed to encourage material towards the outlet and agitator.
The grille helps keep large foreign objects away from the feed mechanism and supports reliable operation.
Agitator selection allows the spreader to be matched more closely to the behaviour of salt, grit, sand and other approved materials.
Keeping rain and snow out of the hopper helps reduce clumping, bridging and interrupted flow.
Lighting, reflectors, boundary-control equipment and tool holders prepare the spreader for practical municipal routes and low-light operation.
Matev range finder
Start with the route, then select capacity.
This guide points you towards the best starting family. Final specification must also confirm tractor payload, linkage, hydraulic services, material density and operating speed.
Choose SPR-BX when the material must remain within a fixed width.
Choose SPR-DS when the same tractor must treat paths and open areas.
Consider IX stainless construction for increased corrosion resistance.
Build the complete system
Drive, dosing and accessories matter as much as hopper size.
A professional spreader must fit the tractor, material and route. These are the decisions to settle before ordering.
Attachment and payload
Confirm Cat. 1, Cat. 1N or Cat. 2 linkage, rear overhang, lift capacity and the full operating mass of machine plus material.
Drive source
Select mechanical or hydraulic drive around the tractor's available PTO direction, speed and hydraulic services.
Dosing control
Choose mechanical, hydraulic, electronic or road-speed-related regulation according to route variability and required repeatability.
Winter equipment
Add covers, lighting, work lights, boundary spreading, parking supports, wheels, tool holders and the correct agitator for the material.
Professional accessories
Configure the spreader for the route, not just the tractor.
Moisture protection
Foldable covers help keep the material dry, reducing clumping and making refilling and inspection straightforward.
Lighting and visibility
Road-compliant lighting, reflectors and work lights improve visibility during early starts, night work and poor weather.
Width and boundary control
Adjust the SPR-DS pattern to suit the route and add boundary equipment where one-sided or edge-controlled application is needed.
View Matev spreader accessories →Technical FAQs
Common Matev spreader questions.
When should I choose SPR-BX instead of SPR-DS?
Choose SPR-BX when the material must remain within a fixed 800, 1,000 or 1,200 mm treatment width. Choose SPR-DS when the route needs an adjustable broadcast pattern from 1 to 8 metres.
What is the difference between ST and IX?
ST models use robust steel construction. IX models use high-quality stainless steel in the spreader structure for increased resistance to salt and corrosion. Both use a lightweight PE hopper and stainless spreading components.
How many Matev spreader models are available?
The programme contains three SPR-BX box spreaders and eight SPR-DS broadcast models. The four SPR-DS capacities—125, 250, 400 and 600 litres—are each available as ST steel and IX stainless-steel versions.
Can the application rate be controlled from the cab?
Yes. Depending on configuration, Matev spreaders can use mechanical, hydraulic or electronic regulation. Road-speed-related regulation is also available for applications where the target rate must remain stable as travel speed changes.
What tractor attachment categories are supported?
The range can be configured for Cat. 1, Cat. 1N and Cat. 2 linkages, with other attachment arrangements available for selected machines. Payload, linkage geometry, hydraulic services and rear overhang must still be checked for the tractor.
Can Matev spreaders handle different materials?
The core winter materials are salt, sand and grit. Special agitators and configuration options allow the machine to be matched to different material characteristics. Particle size, moisture content and density must be confirmed before specification.
How does Matev protect material from moisture?
Optional foldable covers keep rain and snow away from the hopper, helping prevent clumping and bridging. The SPR-DS hopper shape and protective grille also support a stable feed into the agitator and spreading plate.
Which accessories are most useful for municipal work?
Common options include road-compliant lighting, work lights, foldable covers, boundary spreading equipment, tool holders, parking supports, transport wheels, hopper extensions and special agitators.
Specify the whole installation
Match the Matev spreader to your tractor and winter route.
We can confirm the model, ST or IX construction, linkage, drive kit, control system, agitator and accessory package needed for your material and operating conditions.