Hoaf Weed Burner - TWB75-FKDR

Hoaf Weed Burner - TWB75-FKDR

Vehicle-mounted Hot Air Weeders

Kersten Wholegoods Item Code: TWB75-FKDR

£ 8,950.00 GBP (£ 8,950.00 / Unit)

The HOAF thermHIT 75 is available as an attachment for the Kersten FKDR Linkage to fit Ride On Mowers. This burner has a working width of 750 mm and is most suited to maintain weeds on hard surfaces without the use of herbicides on paths and open areas.

Weedo II Intro
Bottle Size
Temp °C
Width
Gas kg/h

12kg

700

75cm

6.0

Product Overview

The HOAF thermHIT ® 75 is the smallest attachment for power units in the HOAF thermHIT ® series. With a working width of 750 mm, this burner is very suitable for keeping larger areas such as squares, walking routes, bicycle paths and the like free of weeds. Despite the large working width, the HOAF thermHIT ® 75 continues to move easily thanks to the robust wheels. The burner is ignited electrically by means of a battery igniter.

The Hoaf thermHIT is ideal for burning weed on paths, paving and around obstacles. The gas consumption of the thermHIT 75 is around 6kg per hour. This can treat up to 2250m² at a slow walking pace.

The HOAF Mounted burners are balanced very well, which results in simple operation. The gas consumption can be adjusted using the gas control valve which results in gas efficient operation. Thanks to the low burner cover it is possible to easily burn under benches. The ThermHIT 75 uses Liquid Propane Gas bottles with liquid off-take available from Calor Gas in 12kgs. The bottle trolley is built into the machine, which makes light work of transporting the gas supply.

Hoaf Thermhit 75 :

  • Gas - Liquid Propane - (gas off-take)
  • Capacity - 82kw Gas Consumption - 6.0kg/hour
  • Ignition Device - Piezo
  • Woking width - 750mm
  • Weight - 40Kg
  • Capacity per hour - 2250m² @ 3kmh
  • Warranty - 1 year
  • Complete with:
  • Adjustable gas pressure regulator.
  • Burner protection shield.
  • Product Applications

    Spot Treating Moss and Weeds

    The life of a weed is cyclical; with many stages in its growth. One of the ways we can manage weeds is by interrupting the cycle at different stages. A burst of heat congeals the cells within the plant leaves, preventing it from photosynthesising... we can also use this technique on seeds, which are made of similar material - rendering them incapable of producing a plant. Using the method over time will lead to a great reduction in weeds on the surface.

    More on Moss and Weed Control

    Product Applications
    “"We could be spending up to 20 hours a week removing moss and dirt from the pedestrian areas," explained John, "and it seemed nothing we did made much difference." "I was so impressed, I needed the machine there and then."”
    Tyne Valley Garden Centre

    Brackets & Linkages

    Bracket for FKDR Linkage

    Design Features

    Stainless Diffusers

    Bottle Holder

    Bracket for FKDR

    Ergonomic Controls

    Wind Shield

    Regulator

    Enquiries

    For Enquiries click below and fill the form