Hoaf Weed Burner - TWB100K

Hoaf Weed Burner - TWB100K

Powered Pedestrian Hot Air Weeders

Kersten Wholegoods Item Code: TWB 100 K

£ 7,995.00 GBP (£ 7,995.00 / Unit)

The HOAF thermHIT 100 is available as an attachment for the Kersten UBS two wheel tractors and front Linkages to fit compact tractors. This burner has a working width of 1000 mm and is most suited to maintain weeds on hard surfaces without the use of herbicides on paths and open areas.

Bottle SizeTemp°CWorking WidthGas kg/h
18kg700100cm8.0

Product Overview

The HOAF thermHIT ® 100M with a working width of 1000 mm is the ideal weed burner to mount on a tool carrier. Due to the low weight of approximately 50 kg, the burner is ideally suited to be combined with light tool carriers. The combination of high productivity and compactness makes it possible to quickly treat pavements with obstacles such as street furniture.

The Hoaf thermHIT is ideal for burning weed on paths, paving and around obstacles. The gas consumption of the thermHIT 100 is around 8kg per hour. This can treat up to 3000m² at a slow walking pace.

The HOAF Mounted burners are balanced very well, which results in simple operation. The gas consumption can be adjusted using the gas control valve which results in gas efficient operation. Thanks to the low burner cover it is possible to easily burn under benches. The ThermHIT 100 uses Liquid Propane Gas bottles with liquid off-take available from Calor Gas in 12kgs. The bottle trolley is built into the machine, which makes light work of transporting the gas supply.

Hoaf Thermhit 100 :

  • Gas - Liquid Propane - (Liquid off-take)
  • Capacity - 110kw Gas Consumption - 8.0kg/hour
  • Ignition Device - Piezo
  • Woking width - 1000mm
  • Weight - 50Kg
  • Capacity per hour - 3000m² @ 3kmh
  • Warranty - 1 year
  • Complete with:
  • Adjustable gas pressure regulator.
  • Burner protection shield.
  • Product Applications

    Spot Treating Moss and Weeds

    The life of a weed is cyclical; with many stages in its growth. One of the ways we can manage weeds is by interrupting the cycle at different stages. A burst of heat congeals the cells within the plant leaves, preventing it from photosynthesising... we can also use this technique on seeds, which are made of similar material - rendering them incapable of producing a plant. Using the method over time will lead to a great reduction in weeds on the surface.

    More on Moss and Weed Control

    Product Applications

    Design Features

    Stainless Diffusers

    Bottle Holder

    Bracket for Linkage

    Ergonomic Controls

    Wind Shield

    Regulator

    “"We could be spending up to 20 hours a week removing moss and dirt from the pedestrian areas," explained John, "and it seemed nothing we did made much difference." "I was so impressed, I needed the machine there and then."”
    Tyne Valley Garden Centre

    Enquiries

    For Enquiries click below and fill the form