HOAF Weed Burner - HFTH045
Hoaf Weed Burner - HFTH045

HOAF Wholegoods Item Code: HFTH045

£ 2,295.00 GBP (£ 2,295.00 / Unit)

The HOAF thermHIT 45 is a hand-operated/pedestrian burner in the HOAF thermHIT series.This burner has a working width of 450 mm and is most suited to maintain weeds on hard surfaces without the use of herbicides on paths and open areas, by using Infrared heat.

Weedo II Intro
Bottle Size
Temp °C
Width
Gas kg/h

13kg

700

45cm

2.5

Product Overview

The HOAF thermHIT ® 45 stands out for its simplicity. Due to its compactness, this burner is multifunctional and very suitable for burning around obstacles. The burner is also suitable for treating small surfaces such as terraces, driveways, picnic areas. The low burner hood makes it possible to easily burn under benches. The HOAF thermHIT ® 45 is well balanced and therefore easy to operate. The burner is ignited electrically by means of a battery igniter.

The Hoaf thermHIT is ideal for burning weed on paths, paving and around obstacles. The gas consumption of the thermHIT 45 is around 2.5kg per hour. This can treat up to 1350m² at a slow walking pace.

The HOAF pedestrian burners are balanced very well, which results in simple operation. The gas consumption can be adjusted using the gas control valve which results in gas efficient operation. Thanks to the low burner cover it is possible to easily burn under benches. The ThermHIT 45 uses Liquid Propane Gas bottles with gas off-take available from Calor Gas in 13kgs. The bottle trolley is built into the machine, which makes light work of transporting the gas supply.

Hoaf Thermhit 45 :

  • Gas - Liquid Propane - (gas off-take)
  • Capacity - 35kw Gas Consumption - 2.5kg/hour
  • Ignition Device - Piezo
  • Woking width - 450mm
  • Weight - 25Kg
  • Capacity per hour - 1350m² @ 5kmh
  • Warranty - 1 year
  • Complete with:
  • Adjustable gas pressure regulator.
  • Burner protection shield.
  • Product Applications

    Spot Treating Moss and Weeds

    The life of a weed is cyclical; with many stages in its growth. One of the ways we can manage weeds is by interrupting the cycle at different stages. A burst of heat congeals the cells within the plant leaves, preventing it from photosynthesising... we can also use this technique on seeds, which are made of similar material - rendering them incapable of producing a plant. Using the method over time will lead to a great reduction in weeds on the surface.

    More on Moss and Weed Control

    Design Features

    Stainless Diffusers

    Bottle Holder

    Piezo Ignition

    Ergonomic Trigger

    Wind Shield

    Regulator

    “"We could be spending up to 20 hours a week removing moss and dirt from the pedestrian areas," explained John, "and it seemed nothing we did made much difference." "I was so impressed, I needed the machine there and then."”
    Tyne Valley Garden Centre

    Enquiries

    For Enquiries click below and fill the form